Roller grading line for pelagic fish


Application

Roller grading line is designed to calibrate fish by its thickness. The design is made for fresh small fish like sprats and Baltic herring species and similar ones like sardines, pilchards and anchovies.

Main benefits

  • Fast and safe grading
  • Less damage to fish
  • Easy adjustable grading system
  • Only 2 operators needed

Operating principle

Fish is supplied into receiving tank, where hopper- elevator lifts them up and drops onto distribution chute that later guides them onto rotating rollers. Tank is equipped with water level control system that helps to control permanent fish flow in any stage of work.

Roller grading unit performs fish grading into three grades + oversize grade. Grading unit rollers are deployed into V shape with option to adjust the gap between rollers on in and out
feed sides. Fish slides down the gap between rollers while the size of the gap is smaller than thickness of fish. When the fish size matches the gap size it falls through the roller gap and drops
in the determined grade.

Grades are separated and guided to cross – conveyors by easy moveable chutes. Fish from each grade is conveyed to the plastic bins is transported out with cross-conveyors. When the
plastic bins are full with fish, the line operator can separately stop any of cross-conveyors, change the bin and run the conveyor again.

Oversize grade is located at the end of roller unit.

Processing capacity

ProductAny product that must be sorted
Number of operators5-25
Number of gradesUp to 3
Grading capacity1000 kg – 10000 kg

Contact form

Please fill out the form below and one of our representatives will be in touch with you in the near future.